Buying a brand-new rendering machine isn't the only way to add machine application to your business. A good quality used rendering machine can offer excellent value, particularly if you're buying your first machine, adding capacity to an existing setup or looking for a specific model without the cost of buying new.
However, there's a big difference between buying a well-maintained second-hand machine and buying equipment with an unknown history.
Before committing to a used or refurbished render pump, take the time to inspect it properly. Here's our contractor's checklist of some of the most important areas to consider.
First impressions can tell you a lot.
A used machine will naturally show signs of working life, so scratches and cosmetic marks aren't necessarily a problem. More important is whether the machine appears to have been properly looked after.
Look for:
A machine doesn't need to look brand new, but its condition can give you clues about how it has been treated.
When buying second-hand rendering equipment, find out as much as possible about its previous use.
Ask how old the machine is, what materials it has pumped and whether it has been used regularly or only occasionally.
It's also worth asking about its service and maintenance history. Has it received routine servicing? Have any major components been replaced? Are there known faults?
Buying from a specialist supplier such as CES Hire can provide additional reassurance because you have someone to speak to about the machine rather than relying solely on a private description.
On many rendering machines, the rotor and stator are important wear components and should be included in your inspection.
Check their condition and ask when they were last replaced. A worn pump set can affect pressure, output and the consistency of material delivery.
Remember that wear parts are designed to be replaced, so an older rotor and stator aren't necessarily reasons to reject an otherwise good machine. You should, however, factor replacement parts into your overall purchase cost.
Take a good look inside the hopper and, where applicable, the mixing area.
Check for excessive hardened material, damaged components and signs that the machine hasn't been cleaned properly after use.
If you're considering a machine with an integrated mixer, inspect the mixing shaft and paddles for wear or damage too.
Good cleaning and maintenance can have a significant impact on the working life of a render spray machine.
Don't focus solely on the machine itself.
If delivery hoses, air hoses, spray guns, remotes or other accessories are included in the sale, inspect
Look for damaged hoses, worn couplings, poor connections and excessive material build-up. It's also worth confirming exactly what is included before comparing the price with another used machine.
A cheaper machine may not represent better value if you immediately need to purchase hoses, a spray gun, compressor or other essential equipment separately.
Whenever possible, see a used rendering machine operate before buying it.
A working demonstration allows you to check that the machine starts correctly and that its main functions operate as expected.
Depending on the machine, pay attention to:
If you're unfamiliar with rendering machinery, buying through a specialist such as CES Hire who understands the equipment can be particularly valuable.
The purchase price isn't the only cost to consider.
Before buying an older machine, check whether replacement parts, wear parts and servicing support are readily available.
A very cheap machine can quickly become expensive if essential components are difficult to source or if you struggle to find someone with the knowledge to repair it.
Choosing an established make and model with good parts availability can make ownership considerably easier.
Finally, consider whether used equipment is actually the right option for your business.
A used or refurbished rendering machine can be an excellent choice if you want to reduce your initial investment. However, depending on the machine's age, condition and price, buying new may sometimes make more financial sense. Hiring the machine can also be an option.
Look beyond the headline price and consider:
Purchase price + immediate repairs + replacement wear parts + missing accessories + ongoing maintenance
This gives you a much more realistic idea of the machine's true cost.
A well-maintained used rendering machine can provide years of productive service and offer a cost-effective way to invest in professional machine application.
The key is knowing what you're buying.
Check the overall condition, investigate its history, inspect wear components and accessories, consider future parts availability and, wherever possible, see the machine working before you commit.
At CES Hire, we've spent over 40 years working with specialist plastering and rendering equipment. Our experience means we understand what to look for when assessing machinery and the importance of ongoing parts, servicing and technical support.
Take a look at our current selection of used and refurbished equipment to see what's available.